
Amputee Support Hardware Only
$128.10
The multi-axis design of the hardware has 3 pivot points to allow adjustment for the desired placement of the support pad (not included). Fits 1″ tubes. Manufactured by Therafin.
For more information about this product: Amputee Support Instructions
- Description
- Features
- Additional information
- Reviews (0)
Description
The multi-axis design of the hardware has 3 pivot points to allow adjustment for the desired placement of the support pad (not included). Fits 1″ tubes. Manufactured by Therafin.
For more information about this product: Amputee Support Instructions
• Amputee Support hardware only, supply your own pad
Additional information
Weight | 2 lbs |
---|---|
Dimensions | 10 × 4 × 7 in |
Be the first to review “Amputee Support Hardware Only” Cancel reply
You may also like…
-
Select optionsQuick View
Molded Shoe Holders, Pair w/ Padded Straps
0 out of 5Molded Shoe Holders are designed for strength and durability. The sides are parallel to hold shoes, and the rear heel relief helps high tone individuals. The ankle strap slots are angled for a comfortable fit. Comes with padded straps pre-attached, and hardware to attach them to footplates. The mounting holes are 1.5″ on center. Manufactured by Therafin.
For more information about this product: Molded Shoe Holders Instructions
Select optionsQuick View -
Select optionsQuick View
Vest Replacement Strap
0 out of 5TOP replacement strap includes the male part of a quick release buckle, and a cam lock buckle. BOTTOM replacement strap includes the male part of a quick release buckle, and a metal attaching clip.
Finger loop strap is 1″ wide and 31″ long.
Select optionsQuick View -
Select optionsQuick View
Footbox, Padded
0 out of 5Full Footbox design mounts across both foot plates. It has a slotted base for easy installation and adjustment, and the padded vinyl insert is closed cell washable foam. A footbox allows limited movement while containing the lower extremities. The resilient ABS construction bounces back into shape after impact. Manufactured by Therafin.
For more information about this product: Footbox Instructions
Select optionsQuick View -
Select optionsQuick View
LTS Pad, Curved Molded, & Insert Bracket
0 out of 5Curved Molded LTS Pads are black textured self-skinning polyurethane foam, and are reversible for soft or firm support. 3″ x 6″ pad is 3/4″ thick, 4″ x 7″ pad is 1.5″ thick.
One LTS pad with insert bracket. The insert bracket attaches the pad to the LTS Kit. Manufactured by Therafin.
Select optionsQuick View -
Add to cartQuick View
Economy Arm Trough with Adjustable Height Bracket
0 out of 5The Economy Arm Trough is used to keep an arm supported while in a wheelchair. It is made with black, molded plastic and foam padding. The Trough is reversible and can be used on either the right or left armrest.
Bracket is armpad height adjustable to fit maximum dimensions of 2-1/2″ wide by 1-1/2″ tall. Manufactured by Therafin.
For more information about this product: Economy Arm Trough with Adjustable Height Bracket Instructions
Add to cartQuick View -
Select optionsQuick View
Soft Headrest Replacement Cover Only
0 out of 5Replacement Cover Only for Soft Headrest Pads, with a zipper on the back. 3 sizes available, choose the desired fabric. Manufactured by Therafin.
Select optionsQuick View
Related Products
-
Select optionsQuick View
Classic Value Wheelchair Vest, Comfort Fit Straps
0 out of 5Classic Value Stretch Wheelchair Vest has Comfort Fit Straps, with Therafin’s hinged buckles that help shoulder straps stay secure at various angles. The flexible blended neoprene material can be hand washed and air dried. 8 sizes available.
Stand behind user and pull finger loops to adjust top straps, and pull finger loops to adjust bottom straps. Hardware to attach to wheelchair is included. Manufactured by Therafin.
A VEST IS NOT A SAFETY DEVICE. IT IS TO BE USED ONLY FOR POSITIONING
Click on the small picture above (the left picture) to help you decide what size vest to order
For more information about this product: Value Vest Instructions, Using Vest Straps and Attaching Hardware
Select optionsQuick View -
Add to cartQuick View
Hip Belt, Bariatric
0 out of 5Padded Bariatric Hip Belts have a metal buckle with push button release, and the pads are attached to the straps. A single finger pull adjusts the belt to user. Hardware to attach to wheelchair is included. Manufactured by Therafin.
A HIP BELT IS NOT A SAFETY DEVICE. IT IS TO BE USED ONLY FOR POSITIONING
Padded Bariatric Hip Belts have 2″ straps and are 91″ long, fully extended without attaching hardware. The padded area dimensions are 11.25″L x 3″H.
For more information about this product: \tHip Belt Strap Instructions, Hip Belt Attaching Hardware
Add to cartQuick View -
Select optionsQuick View
Classic Value Wheelchair Vest, Comfort Fit Straps w/ No-Sew Buckles
0 out of 5Classic Value Stretch Wheelchair Vest has Comfort Fit Straps, with Therafin’s no-sew buckles that resist tear-out. The flexible blended neoprene material can be hand washed and air dried. 8 sizes available.
Hardware to attach to wheelchair is included. Manufactured by Therafin.
A VEST IS NOT A SAFETY DEVICE. IT IS TO BE USED ONLY FOR POSITIONING
For more information about this product: Value Vest Instructions, Using Vest Straps and Attaching Hardware
Select optionsQuick View -
Add to cartQuick View
Leg Strap
0 out of 5Our leg strap is 30″ long soft strap is 2″ wide. Hook and loop end tabs are removable, easily cut to desired length. Place behind legs for support. Manufactured by Therafin.
Add to cartQuick View -
Select optionsQuick View
Shoeholder – Molded With Plain Straps , Pair
0 out of 5Molded Shoe Holders are designed for strength and durability. The sides are parallel to hold shoes, and the rear heel relief helps high tone individuals. The ankle strap slots are angled for a comfortable fit. Comes with plain non-padded straps pre-attached, and hardware to attach them to footplates. The mounting holes are 1.5″ on center. Manufactured by Therafin.
For more information about this product: Molded Shoe Holders Instructions
Select optionsQuick View -
Select optionsQuick View
Vinyl Wheelchair Vest, No-Sew Buckles
0 out of 5Our vinyl wheelchair vest features no-sew buckles that resist tear-out. Stand behind user and pull finger loops to adjust top straps.
Select optionsQuick View -
Select optionsQuick View
Wheelchair Seat Harness
0 out of 5The Seat Harness has long adjustable front straps that go over the thighs. Position the harness under the buttocks, with the front straps/buckles between the legs.
Metal clips and cam lock buckles to attach the harness to the wheelchair are included. Manufactured by Therafin.
A SEAT HARNESS IS NOT A SAFETY DEVICE. IT IS TO BE USED ONLY FOR POSITIONING
For more information about this product: Using the various buckles, clips, straps and attaching harness to chair
Select optionsQuick View -
Add to cartQuick View
Hinged Collar for Strap Attachment
0 out of 5To simply attach a chest strap, vest or hip belt to a wheelchair without drilling holes in the frame, use Hinged Collars as mounting points. One size fits 7/8″, 1″ and 1-1/8″ tubing. Sold single. Manufactured by Therafin.
THIS IS NOT A SAFETY DEVICE. IT IS TO BE USED ONLY FOR POSITIONING
For more information about this product: Using with Chest Straps and Hip Belts, Using with Vests
Add to cartQuick View -
Select optionsQuick View
Comfort Fit Wheelchair Vest, Trim Shape
0 out of 5Comfort Fit Wheelchair Vests have Therafin’s new exclusive hinged buckles that help shoulder straps stay secure at various angles. The flexible blended neoprene material can be hand washed and air dried. Sizes available to comfortably fit bariatric users.
Stand behind user and pull finger loops to adjust top straps, and pull finger loops to adjust bottom straps. Hardware to attach to wheelchair is included. Manufactured by Therafin.
A VEST IS NOT A SAFETY DEVICE. IT IS TO BE USED ONLY FOR POSITIONING
Click on the small picture above (the left picture) to help you decide what size vest to order
For more information about this product: Comfort Fit Vest Instructions, Comfort Fit Vest video, Using Vest Straps and Attaching Hardware
Keep your vest clean with a washable Comfort Fit Vest Sleeve.Select optionsQuick View -
Add to cartQuick View
Sling Back Chair Vest Attachment
0 out of 5Simply adjust the width and slide it onto the push handles of a Sling Back wheelchair. Position a vest (not included) on the user and place the shoulder straps into the cam locks. Works with vests that have 1″ straps, and fits’s 18″ to 20″ chairs. Manufactured by Therafin.
THIS IS NOT A SAFETY DEVICE. IT IS TO BE USED ONLY FOR POSITIONING
Add to cartQuick View
Reviews
There are no reviews yet.